Optional Dual Entry Module Alternating Current (Ac) Power Interface (Redundancy Units Only); Figure 3-8. Mbt-5000 Optional Dual Entry Module Ac Power Interface - Comtech EF Data MBT-5000 User's Installation And Operation Manual

MBT-5000 L-Band Up/Down Converter System
Rear Panel Connections
o Use the slot to pry the holder outward from the IEC power module.
o Pull the holder straight out, and then swing the holder away from the module.
•
Then, remove and replace the fuses as needed.
o Use T2.0A (2 Amp) fuses for standard operation.
• Finally, re-seat the fuse holder in the IEC power module.
3.3.2.2 Optional Dual Entry Module Alternating Current (AC) Power
Interface (Redundancy Units Only)

Figure 3-8. MBT-5000 Optional Dual Entry Module AC Power Interface

3–12
MN-MBT5000
Revision 4