Select: Utility Menu Branch; Utility: Date/Time (Set Real-Time Clock); Utility: Cid (Circuit Id) - Comtech EF Data MBT-5000 User's Installation And Operation Manual

MBT-5000 L-Band Up/Down Converter System
Front Panel Operation
5.2.5

SELECT: Utility Menu Branch

UTILITY: Date/Time CID
Display Firmware LNA
Use the ◄ ► arrow keys to select from the submenu choices shown, and then press ENTER.
The submenus available from the SELECT: Utility menu branch are as follows:
Submenu
Date/Time
CID
Display
Firmware
LNA
5.2.5.1

UTILITY: Date/Time (Set Real-time Clock)

Edit Real-Time Clock:
12:00:00 04/24/14(◄ ►▲▼ E)
To edit the time and date settings for the real-time clock, use the ◄ ► arrow keys to first select
the digit to edit, and then use the ▼▲ arrow keys to edit the value of that digit.
The time is set in 24-hour military format (HH:MM:SS). The date is set in MM/DD/YY format.
Press ENTER when done.
5.2.5.2

UTILITY: CID (Circuit ID)

Edit Circuit ID:
24 CHARACTER TST MESSAGE
The Circuit ID is a user-configurable unit label. On the bottom line, use the ◄ ► arrow keys to
first select the character to edit, and then use the ▼▲ arrow keys to edit that character. Press
ENTER when done.
A maximum of 24 characters are available, as follows:
Press ENTER once you compose the string – the MBT-5000 removes all trailing spaces from the
string upon entry.
Sect Function
5.2.5.1 Edits the Real-Time Clock time and date settings
5.2.5.2
Edits the 24-character Circuit ID string.
5.2.5.3 Adjusts the brightness level of the Vacuum Fluorescent Display (VFD).
Displays the installed internal firmware and permits user the boot using a selected
5.2.5.4
firmware image.
Permits control of any LNAs (Low-Noise Amplifiers) configured for use with the
5.2.5.5
MBT-5000.
[Space] ( ) * + - , . / 0-9 and A-Z.
5–18
MN-MBT5000
Revision 4