2. Loading Paper
3.
Adjust the side guides to the paper width.
To deliver the sheets face up, open the rear cover.
Specifying Paper Type and Paper Size Using Smart Organizing Monitor
The procedure in this section is an example based on Windows 7. The actual procedure may vary
depending on the operating system you are using.
Specifying the paper type and paper size
1.
On the [Start] menu, click [All Programs].
2.
Click [Smart Organizing Monitor for SP xxx Series].
3.
Click [Smart Organizing Monitor for SP xxx Series Status].
4.
If the machine you are using is not selected, click [Select Device...], and then select the
machine's model.
5.
Click [OK].
6.
On the [Status] tab, click [Change...].
To specify the type and size of paper in the bypass tray, click [Printer Configuration] on the [User
Tool] tab, and then click the [Copy] tab.
26
CTT033
CTT094