Installation; Attaching The Stand; Connecting The Phone - Fortinet FortiFone FON-570 User Manual

Installation

Attaching the stand

1. Line the four posts on the top of the base up with the four holes on the back of the phone.
2. Slide sideways into place until secure.

Connecting the phone

1. Connect the handset cord to the handset and the
2. Optionally connect an amplified headset to the
3. Connect the WAN port to the network with the provided Ethernet cable.
4. Optionally connect your desktop PC to the PC port with an Ethernet cable (not supplied).
5. If the network supports PoE, a power adapter is not required. If PoE is not supported on the
network, connect the power adapter (not included) to the DC 5V power jack.
Installation
jack on the phone.
jack.
Page 4 FortiFone User Guide