Lucent Technologies TransTalk 9000 Installation And Use Manual page 76

The higher the number, the better the voice quality, as shown in the table below. A low
number may indicate potential interfering devices (such as another radio transmitter)
in the area. You can press 
time you press  , you get a new reading.
2
9 . To determine power level, press 
The display shows the power level to which the handset (HS) and the base (B) (the
radio module) have adjusted. The power level adjusts from low power (1) to high
power (8) as the pocketphone is moved farther from its base. The following display
shows the pocketphone at its highest setting.
10. To exit Wireless Test Mode and Local Mode, press 
Go to one of the following sections:
If installing one MDW 9031 Pocketphone, go to "Installing a Single Radio
Module" in Chapter 2.
If installing one or more carriers, go to "Understanding Carriers" in Chapter 2.
 again to show a subsequent voice-quality reading. Each
2
Display Number Voice Quality Is
1 0 Very good
Very good/almost error free
9
8
7
6
5
4
3
2
1
.
5
Using the MDW 9031 Pocketphone
Errors, but not noticeable in
normal speech
Errors, but not noticeable in
normal speech
Noticeable noise
Noticeable noise
Noisy but intelligible speech
Noisy but intelligible speech
Garbled speech
Unintelligible speech
.
On/Off
3-15