Lucent Technologies TransTalk 9000 Installation And Use Manual page 58

Insert the battery charger's power cord/AC
5
adapter into the battery charger. If you are
desk-mounting the battery charger, skip to Step 7.
Place the keyhole-shaped openings in the back
6
of the battery charger over the screw heads
and wall spacers, then slide the battery charger
downward into the groove in the wall spacers to lock
it into place.
Plug the battery charger's power cord/AC
7
adapter into a properly grounded 3-prong wall
outlet that is not controlled by an on/off switch.
Installing the MDW 9031 Pocketphone 2-45