Lucent Technologies TransTalk 9000 Installation And Use Manual page 130

Battery Charger Wall-Mounting Template
Use the template below to position the screws for mounting your MDW 9031
Pocketphone battery charger:
1.
Cut out the template along the dotted line.
2.
Lightly affix the template to the wall with tape where you want to attach the
battery charger. If possible, choose a location that will position at least one of
the screw holes over a wall stud.
3 . Mark the wall.
4.
Position a wall spacer on each of the two wood screws provided, and insert the
screws in the wall as far as they will go at the places you marked.
Note:
If you cannot locate a wall stud for one of the screws, use molly bolts or another
type of hollow-wall fastener. Be sure to place the wall spacers on the screws
before inserting them permanently.