Lucent Technologies TransTalk 9000 Installation And Use Manual page 135

TransTalk™ 9000 Digital Wireless System
MDW 9031 Wireless Telephone
This kit contains parts that you must use to install the radio module for a single MDW 9031 Wireless
Telephone. You use similar parts that are packaged with the telephone to install the battery
charger. Refer to the installation guide packaged with the telephone for additional information.
Installing a Single Radio Module
Install high on wall, leaving at least 6–12 inches (15.2–30.5 cm) between antenna and ceiling
Check to make sure the radio module's power cord is unplugged from the wall outlet
1
before continuing.
Detach the four rubber feet. Apply them to marked areas
2
on the underside of the radio module.
Comcode 108174764
Kit of Parts (Order Number D-182866)
Parts List
Radio Module 11-foot (3.4 m)
Power Cord and
Standard AC Adapter
Philips Head
Wood Screws (2)
Lucent Technologies
Bell Labs Innovations
Rubber Feet (4)
Wall Mounting
Plate