Adding The Port Filter Rule - Tenda W15E User Manual

Parameter description
Parameter Description
Port Filter It specifies whether to enable the port filter function. It is disabled by default.
It is used to add the port filter rule.
It is used to delete the selected rule.
IP Group It specifies the IP Group to which the rule is applied.
It specifies the time when the rules take effect, that is the specified time when the specified
Time Group
devices in the IP group cannot access the internet.
Port It specifies the inaccessible service port.
It specifies the protocol of the inaccessible service. It is recommended to retain the default
Protocol Type
settings.
Status It specifies the current status of the rule, including Enabled and Disabled.
The following operations can be preformed on the rules:


Operation


7.4.2

Adding the Port Filter Rule

Step 1 To access the page, choose Filter Management > Port Filter.
Step 2 Enable the Port Filter, and click OK.
Step 3 Click +Add.
: It is used to disable the rule.
: It is used to enable the rule.
It is used to edit the rule.
: It is used to delete the rule.
68