Table of Contents
Advertisement
Step 3
Set the router 2 functioned as VPN client.
1.
To access the page, choose VPN > PPTP/L2TP Client.
2.
PPTP/L2TP Client: Click Enable.
3.
Client Type: Click PPTP.
4.
WAN: Select the WAN port used by router 2 for the VPN client, which is WAN1 in this example.
5.
Server IP Address/Domain Name: Enter the IP address (or corresponding domain name) of the WAN
port used by the VPN server.
6.
Username/Password: Enter the username and password of the VPN client assigned by the VPN server.
7.
Encryption: Click Enable.
8.
Remote LAN: Enter the local network segment of the server.
9.
Remote Subnet Mask: Enter the local network subnet mask of the server.
10.
Click OK.
100
Advertisement
Table of Contents
