Restoring Factory Settings Via Reset Button; System Time; Overview; Manual Setup - Tenda W15E User Manual

15.5.3

Restoring Factory Settings via Reset Button

After the router is powered on, hold down the Reset button using a paper clip for 8 seconds. Wait about 1 minute.
15.6

System Time

15.6.1

Overview

This module enables you to set the system time of the router. To ensure that the rules take effect, keep the system
time of the router correct. To access the page, choose Maintenance > System Time.
The router supports Sync with Internet Time and Manual Setup.
 The default configuration of the router is Sync with Internet Time. After connected to the internet, the router
synchronizes the system time at a specified interval with the time server over the internet.
System time disappears if the router is turned off. After the router is turned on and connected to the internet next

time, it synchronizes the system time automatically to enable the configurations associated with time take effect.
15.6.2

Manual Setup

Step 1 Choose Maintenance > System Time.
Step 2 Select Manual Setup.
Step 3 Click Sync with Local PC Time, and click OK.
161