Configuring Mac Address Cloning - Tenda W15E User Manual

Parameter description
Parameter Description
It specifies the WAN speed of the router. Auto-negotiation is selected by default. You are
WAN Speed
recommended to retain the default value.
Maximum transmission unit (MTU). It specifies the size of the largest data packet that can
MTU
be transmitted by the router. You are recommended to retain the default value.
It is used to clone a MAC address for the WAN port. If the router cannot access the internet
after you configure the internet settings, it maybe that the ISP has bound the connection
information with a MAC address. In this case, you can try to clone the MAC address, and
access the internet again.

MAC Address



FastNAT It is used to improve the forwarding performance of NAT.
5.2.2

Configuring MAC Address Cloning

Step 1 Choose Network > WAN Parameters.
Step 2 MAC address: Select Clone Local Host's MAC or Manual from the drop-down list box. If you choose
Manual, enter the MAC address that you want to clone.
Step 3 Click OK.
---End
Current MAC: It specifies the current MAC address of the WAN port of the router.
Default MAC: It is used to restore the MAC address of the WAN port of the router to
factory settings.
Clone Local Host's MAC: It is used to clone the MAC address of the computer that is
currently logged in to the router to the WAN port of the router.
Manual: Manually enter the MAC address to be cloned to the WAN port of the router.
18