7.1.3
Adding an IP Group
Step 1
Click +Add.
Step 2
Configure the rule parameters in the window that appears.
1.
Name: Set the name of the rule.
2.
IP Range: Set the specific IP address or IP address range applied to the filter management functions.
3.
Click OK.
---End
7.2
IP Filter
7.2.1
Overview
Generally, a device can access the internet either by obtaining a dynamic IP address from the router or using a
static IP address. This module enables you to set whether the IP group covered by a rule is accessible to the
internet.
To access the page, choose Filter Management > IP Filter.
Enable the IP Filter, see the following figure.
57