Configuring Remote Web Management; Example Of Remote Web Management - Tenda W15E User Manual

Parameter Description
It specifies the IP addresses that can remotely access the router.

Allowed Internet
User(s)

It specifies the port number for remotely managing the router. The default port is 8088,
which can be modified if necessary.
Port
Since ports 1~1024 are used by common service, you are strongly recommended to set the
value in the range of 1025~65535 to prevent port conflicts.
15.7.2

Configuring Remote WEB Management

Step 1 Choose Maintenance > Remote WEB Management.
Step 2 Remote WEB Management: Click Enable.
Step 3 WAN: Select the WAN port as required.
Step 4 Allowed Internet User(s): Set the IP addresses allowed to access the router remotely.
Step 5 Port: Set the port number used for remote access. You are recommended to retain the default value.
Step 6 Click OK.
---End
15.7.3

Example of Remote WEB Management

Networking requirement
A company uses W15E to deploy its network environment. The IP address of WAN1 of the router is
202.10.5106.55.It requires that the network administrator remotely manage the network when on business travel.
Solution
The remote WEB management function can address this requirement. The following figure shows the topology.
Anyone: All remote computers can login to the web UI of the router. It is not
recommended for network security.
Specified IP: Only computers assigned with the specified IP addresses can remotely access
the web UI of the router.
163