Tenda W15E User Manual page 69

Parameter description
Parameter Description
IP Filter It specifies whether to enable the IP filter function. It is disabled by default.
It is used to add the IP filter rule.
It is used to delete the selected rule.
It specifies whether the IP Group covered by the rule can access the internet.
Type


IP Group It specifies whether the IP group on the list can or cannot access the internet.
Time Group It specifies the time when the IP filter rule takes effect.
Status It specifies the current status of the rule, including Enabled and Disabled.
The following operations can be preformed on the rules:


Operation


Allow hosts It specifies whether the hosts not covered by any enabled rule can access the internet.
covered by

disabled rules or
not covered by
the preceding

rules to access
the internet
Whitelist: It specifies the IP group that can access the internet.
Blacklist: It specifies the IP group cannot access the internet.
: It is used to disable the rule.
: It is used to enable the rule.
It is used to edit the rule.
: It is used to delete the rule.
When selected, the IP groups covered by disabled rules and all IP not covered by any
enabled rule can access the internet.
When unselected, only the IP groups covered by enabled whitelist rules can access the
internet.
58