Changing Parameters Of The Guest Network - Tenda W15E User Manual

Parameter
SSID
Chinese SSID
Encoding
Security
WiFi Password
LAN IP
LAN IP of Guest
Network
Subnet Mask
6.5.2

Changing Parameters of the Guest Network

Step 1 Choose Wireless > Guest Network.
Step 2 Modify the relevant parameters as required. For example, modify the SSID to Tenda_Guest.
Step 3 Click OK.
---End
Description
Disable: It indicates that the wireless clients connected to the guest

network can communicate with each other.
It specifies the WiFi name of the guest network. By default, the SSID at 2.4
GHz is Tenda_Guest, whereas the SSID at 5 GHz is Tenda_Guest_5G.
You can modify it as required. You are recommended to set a SSID that is
dtinguishable from the SSID of the non-guest network for easy
identification.
It specifies the encoding format of Chinese characters in the guest
network. The default code format is UTF-8.
If the wireless clients such as smart phones cannot scan the SSID, or the
available SSID list includes garble characters when Chinese characters are
used in the SSID, you can select the GB2312 as the encoding format.
It specifies the encryption type of the guest network.
None: It indicates that any wireless client can connect to the network.

WPA-PSK: It is a standard, interoperable and enhanced WLAN security

solution, adopting an encryption algorithm more secure than
WEP.WPA2-PSK: It provides better security than WEP or
WAP.WPA-PSK&WPA2-PSK: Both WPA-PSK and WPA2-PSK are
supported.
It specifies the WiFi password of the guest network.
It specifies the LAN IP of the guest network. By default, it is 192.168.168.1.
After connected to the guest network, the wireless client obtains an IP
address of 192.168.168.X.It is recommended that you retain the default
value.
It specifies the subnet mask of the LAN IP of the guest network.
46