Example Of Configuring Access Control - Tenda W15E User Manual

Parameter
Allow
Disallow
MAC Address
Status
Operation
6.7.2

Example of Configuring Access Control

Networking requirement
A company uses W15E to deploy a network. Generally, it disallows clients connected to the WiFi to access the
internet. HR personnel now need to connect toTenda_888888 to access the internet.
Solution
The access control function can address this requirement. Assume that the MAC address of the HR's computer is
CC:3A:61:71:1B:6E.
Configuration procedure
Step 1 Choose Wireless > Access Control.
Step 2 Locate the corresponding SSID, select the check box of Enable Access Control, and click Allow.
Step 3 Click +Add.
Description
It indicates that only the wireless clients on the access control list can connect to the
SSID.
It indicates that only the wireless clients on the access control list cannot connect to the
SSID.
It is used to manually add the MAC address of the wireless client to be controlled.
It is used to delete the selected rule.
It specifies the MAC address of the client covered in the rule.
It specifies the current status of the rule, including Enabled and Disabled.
The following operations can be performed on the rules:
: It is used to disable the rule.

: It is used to enable the rule.

: It is used to edit the rule, including MAC address, and remark.

: It is used to delete the rule.

51