Tenda W15E User Manual page 92

Step 4 Set the multi-WAN policy parameters.
---End
Parameter description
Parameter Description
It is used to add the multi-WAN policy rule.
It is used to delete the selected rule.
IP Group It specifies the IP Group to which the rule is applied.
Specified WAN It specifies the WAN port of ingoing and out going packet of a IP group.
Status It specifies the current status of the rule, including Enabled and Disabled.
The following operations can be preformed on the rules:


Operation


: It is used to disable the rule.
: It is used to enable the rule.
: It is used to edit the rule.
: It is used to delete the rule.
81