Add A Web Filter Rule - Tenda W15E User Manual

Parameter description
Parameter Description
Web Filter It specifies whether to enable the web filter function. It is disabled by default.
It is used to add a web filter rule.
It is used to delete the selected rule.
IP Group It specifies the IP Group to which the rule is applied.
It specifies the time when the rules take effect, that is the specified time when the specified
Time Group
devices in the IP group cannot access the websites.
Category It specifies the website category inaccessible to the clients.
Status It specifies the current status of the rule, including Enabled and Disabled.
The following operations can be preformed on the rules:


Operation


Website
Management
7.5.2

Add a Web Filter Rule

Step 1 To access the page, choose Filter Management > Web Filter.
Step 2 Select the check box of the Web Filter, and click OK.
: It is used to disable the rule.
: It is used to enable the rule.
It is used to edit the rule.
: It is used to delete the rule.
: It is used to view or add web category to be managed.
73