Pppoe; Dynamic Ip - Tenda W15E User Manual

Parameter
Primary/Secondary
DNS
Connection Status
5.1.1

PPPoE

PPPoE enables you to use the username and password provided by the ISP to access the internet. The following
describes the configuration steps.
Step 1 Choose Network > Internet Settings. The page displays the parameters for the function.
Step 2 Connection Type: Select PPPoE.
Step 3 PPPoE Username and Password: Enter the username and password provided by your ISP.
Step 4 Click OK.
---End
Wait a second. You can access the internet when the connection status is Connected.
5.1.2

Dynamic IP

If the ISP does not provide information for internet connection, or your computer is set to automatically obtain
the IP address, the connection type is Dynamic IP. The following describes the configuration steps.
Step 1 Choose Network > Internet Setup. The page displays the parameters for the function.
Step 2 Connection Type: Select Dynamic IP.
Step 3 Click OK.
Description
information, ask your ISP.
It specifies the connection status of WAN ports. The connection status includes:
Connected: The router connects to the internet successfully.

Connecting...: The router is connecting to the internet.

Disconnected: The router is disconnected, or connection fails. In this case, check

your internet settings, or ask your ISP.
For other connection status, take appropriate measures according to the on-screen
instructions.
16