An Example Of Setting A Mac Address Filter Rule - Tenda AC1200 User Manual

Step 6 Click OK at the bottom of the page.
---End
Deleting a rule
Step 1 Click Advanced to enter the configuration page, and move to the MAC Address Filter
module.
Step 2 Click corresponded to the MAC address filtering rule to be deleted.
Step 3 Click OK at the bottom of the page.
---End
10.1.3

An example of setting a MAC address filter rule

A family uses AC8 to access the internet. Recently an unknown device is found in the Online
Device list. Under such circumstance, the MAC address filter function can be used to disallow the
unknown device to connect to the WiFi network of the router for internet access.
Assume that the MAC addresses of the unknown device is D8:CE:3A:8F:71:24.
Configuration procedure:
Step 1 Choose Advanced > MAC Address Filter.
Step 2 Set Filter Mode to Blacklist.
Step 3 Enter the MAC address to be disallowed to access the internet, which is
D8:CE:3A:8F:71:24 in this example.
Step 4 Enter the remark information of the device, which is Unknown device in this example.
Step 5 Click .
Step 6 Click OK at the bottom of the page.
54