Tenda W15E User Manual page 74

Parameter description
Parameter Description
MAC Filter It specifies whether to enable the MAC filter function. It is disabled by default.
It is used to add the MAC filter rule.
It is used to delete the selected rule.
It specifies whether the MAC address covered by the rule is accessible to the internet.
Type


MAC Address It specifies the MAC address of a client.
It specifies the time when the corresponding device on the list can or cannot access the
Time Group
internet.
Status It specifies the current status of the rule, including Enabled and Disabled.
The following operations can be preformed on the rules:


Operation


Allow hosts It specifies whether the hosts not covered by any enabled rule can access the internet.
covered by

disabled rules or
not covered by
the preceding

rules to access
the internet
Whitelist: It indicates the MAC addresses that can access the internet.
Blacklist: It indicates the MAC addresses that access the internet.
: It is used to disable the rule.
: It is used to enable the rule.
It is used to edit the rule.
: It is used to delete the rule.
When selected, devices covered the disabled rules and all devices not covered by any
enabled rule can access the internet.
When unselected, only devices covered the whitelist rules can access the internet.
63