Table of Contents
Advertisement
Connection
Common Internet
Type
Connection Means
Telephone
PPPOE
line/Ethernet cable
Cable TV
DHCP
connection/Ethernet
cable
Static IP
Ethernet
Address
cable/Optical fiber
Q3.
I cannot access the web UI of the router. What should I do to restore the factory settings?
A3:
Hold down the Reset button using a paper clip for 8 seconds, and wait about 1 minute. After the factory
settings are restored, configure the router again. The default login IP address of the router is 192.168.0.1.
Q4.
What should I do if a computer connected to the router displays an IP address conflict message?
A4:
Verify that there is no other DHCP server on your LAN or the other DHCP server is disabled.
Verify that the IP address of the computer is not used by another device on your LAN. The default IP
address of the router is 192.168.0.1.
Verify that the static IP addresses assigned to computers on your LAN are not used by other devices.
If you have any other problems, please visit
Requirement
Username and password
Click
to dial up.
Connect to the upstream router to access the
internet.
Connect to a cable TV service to access the internet
You are assigned a static IP address, a subnet mask, a
default gateway address, and DNS server addresses for
accessing the internet.
http://www.tendacn.com
or send emails to tenda@tenda.com.cn.
177
Advertisement
Table of Contents
