Internet Connection Setup; Use Standard Tcp/Ip Properties For Dhcp; Log In To Web Manager - Tenda W303R User Manual

N300 home router

Hide thumbs Also See for W303R:

Table of Contents

3. Connect the Ethernet cable from Internet side to the WAN port on the

Device.

4. When connected, log in to Web manager to set up Internet connection.

2.3 Internet Connection Setup

Before you start the setup process, get your ISP information and make sure

the computers and devices in the network have the settings described here.

If you set up your computer to use a static IP address, change the settings

so that it uses Dynamic Host Configuration Protocol (DHCP)

clear about this configuration, please refer to

1. 1). Launch a web browser; in the address bar, input 192.168.0.1 and

press Enter;

2). Enter admin in the password field on the appearing login window and

then click OK.

Wireless N300 Home Router

If you are not

Appendix 1: How to Configure

Table of Contents