Table of Contents
Advertisement
6. Place the forth log on top of the third log. The ember part of the
fourth log locates on a 'V' shaped bump on the burner
7. Place the fifth log on top of the first log. The first log has a
ceramic pin to locate the fifth log
8. Place the sixth log on top of the fifth and first log. The curve in
the sixth log meets up with a locator on the first log. The fifth log
has a groove in it. Line up the front and sixth log with this groove
28
Figure 8.14c
Figure 8.15c
Figure 8.16c
9. Place the split end of the 'Y' shaped seventh log on the ceramic
burner and place the top end on the second log. Place the other
end on the 'Y' on the sixth log
10. Place the end of the eighth log in the ceramic burner. Place the
eighth log across the seventh log
Installation
Figure 8.17c
Figure 8.18c
Figure 8.19c
XG0528 - 170223
Advertisement
Table of Contents
