Table of Contents
Advertisement
3. Evenly distribute the glass media around the burner tray. Make
sure there is only one layer of glass media covering the burner
ports.
4. If you used tape to cover the pilot opening, remove it now.
5. Installation is complete.
Speckled Stone Installation
If your fireplace has already been in operation, shut off the gas and
electrical supply, remove the door and safety barrier.
The driftwood log and speckled stone option is a beautiful way to dress
up your new fireplace insert. Installation of the stones and logs need to
be down in a precise way so that the performance of your appliance is
not altered. Follow these instructions for years of trouble free operation.
1. You will have 6 bags of speckled stones with your package.
Empty the bags of stones into a box and GENTLY mix them up.
2. Place a row of stones front and back of the burner, below the
burner lip.
22
Figure 7.5
Figure 7.6
3. Fill one layer of stones over the remaining screen/burner area.
4. Now carefully place 2 rows of stones along the burner rims so
that 1/2 of the stone is sitting on the stones below and 1/2 of the
stone is resting on the lip of the burner alternating sides.
5. WARNING: Figure 7.9 shows that NO stones are placed over
the pilot assembly or directly in front of where the pilot flame
carries over to the burner. Any exception to this may result in
unfavourable lighting of your appliance, or the durability of the
pilot and/or burner.
Installation
Figure 7.8
Figure 7.9
Figure 7.10
Figure 7.11
XG0528 - 170223
Advertisement
Table of Contents
