Table of Contents
Advertisement
30FID Traditional Log Installation
The unit uses high definition cast ceramic logs for exceptional realism.
The ceramic is fragile and can easily scuff or chip the logs. The inside of
the logs are purple so you want to take care to not damage them. Each
log has specific details for correct log placement such as pins, posts or
embers to line up with. Follow the images provided to ensure proper
operation and flame pattern.
1.
Inspect the logs as received for any shipping or handling
damage.
2.
Place black ceramic air baffle on the left side of the firebox. The
profile of the burner continues on the ceramic log baffle.
XG0528 - 170223
Figure 8.12b
Figure 8.13
3. Place first log on top of the ceramic pin, see Figure 19. Pull first
log forward so that it bumps up against the ceramic embers and
the ceramic air baffle
4. Place the second log on top of the first log ceramic pin and fit the
front end of the log into the cradle of the ceramic burner
5. Place the third log on the ceramic burner. Them ember part of
the log locates on an ember on the burner. The front of the log
locates to a groove in the burner
Installation
Figure 8.14b
Figure 8.15b
Figure 8.16b
27
Advertisement
Table of Contents
