Table of Contents
Advertisement
Brick Panel Installation
The unit must only be used with the Firebox Panels installed. With the
Fireplace Door removed, the panels can be easily installed.
1. Make sure all the Brick Panels are received in good order
2. Slide the side panel along the wall of the Firebox towards the
back of the Firebox. There is a retainer clip at the top and at the
bottom of the Firebox. These Firebox Panels will slide within
them. Leave enough room to slide the rear panel behind the side
panel.
2. Place the Rear Brick Panel behind the Right Panel.
3. Install the Left Brick Panel along the left side of the Firebox.
24
Figure 8.0
Figure 8.1
Figure 8.2
4. Push top retainer in tighter if needed.
Figure 8.4
Porcelain Panel Installation
The unit must only be used with the Firebox Panels installed. With the
Fireplace Door removed, the panels can be easily installed.
1. Make sure all the Porcelain Panels and fasteners are received in
good order.
2. The back of the porcelain panels have insulation. Make sure
insulation is in good order. Without insulation you may
experience pilot stability issues.
3. The porcelain panel kit comes with replacement panel retainers.
Use if necessary. See figure 10 Sec.9 for panel retainer location.
Installation
Figure 8.5
Figure 8.6
Figure 8.7
XG0528 - 170223
Advertisement
Table of Contents
