3. Align the Rear Faceplate with the front of the fireplace.
4. Temporarily, place the Electrical Cord through the hole in the
right side of the Rear Faceplate
XG0528 - 170223
Figure 5.12
Figure 5.13
Figure 5.14
5. Attach the Rear Faceplate to the Firebox using the screws
provided (18 locations). Do not insert screws in magnet locations
highlighted.
6. Install the four Front Faceplate Retainer Magnets using screws
provided as shown (8 locations). Note proper orientation of
magnets.
Installation
Figure 5.15
Figure 5.16
17