IBM 3180 1 User Manual page 81

4.20
Are both the red and green lights OFF?
Yes No 111^ [ 4.21
1. Set the Power switch to Off.
2. Disconnect the power cord.
e
3. If the fuse is blown, replace it. (If you are unsure, replace
it.) The fuse is located behind the plastic cover beside the
power cord connection on the back of the display station.
Either end of the fuse may be installed to the right.
A replacement fuse may be purchased locally at a hardware
store. Fuse size for the United States is 3 Amp 250 V; for
World Trade, 1.5 Amp 250 V.
Slide open
O Pull little lever to remove and replace fuse.
Q Slide closed.
Step 4.20
I Continued
03468036
Chapter 4. Fixing Display Station Problems 73