IBM 3180 1 User Manual page 57

X PROG 454 Screen size error.
Verify that your display station model ID matches the configuration
ofyour controller (for a description ofthe display station model ID,
see Chapter 1).
Theprinter connected to your display station is busy and cannot
perform the print operation you requested. If i=»-«a isdisplayed
onthe right, the printer is busy performing your print operation. If
is displayed on the right, the printer is busy performing an operation
for another display station or the system.
If you initiated the print operation byusing the Print key, you can
eitherwait for the printoperation to end or cancelthe operation. If
you cancel the operation and ca-a is displayed you may be able
to select another printer.
Ifthe print operation was initiated bythe system, you can cancel
the print operation. However, ifthe system initiates the same print
operation again, wait for the printoperationto end.
The Reset key has no effect when this message is displayed.
;.r; Q) This meansthe same as the >< ca-a-Y; message, except more
time is anticipated before your print operation is accepted.
The printer connected to your display station is not working and
cannot performthe print operationyou requested. Therefore, your
print request was cancelled.
If you initiated the print operation by using the Print key, pressthe
Dev Cnl key. You may then select a different printer, try to restore
the failing printer, or take a different action.
If a-M is displayed to the right, the printer stopped working
while printing your own last print operation.
Ifthe printoperation was initiated by the system, you can cancel
the print operation.
The Reset key has no effect when this message is displayed.
X '=»-^
Chapter 3. Operator Messages and Error Codes 49