IBM 3180 1 User Manual page 64

9004 While performing the record or play function, you pressed a PF key
with the Alt key pressed.
To recover, press the PF key with the Alt key up.
9005 You tried to exit from the record function with different or additional
shift keys pressed or with the Alt key pressed. These keys were not
pressed when the first key of the keystroke sequence was recorded.
To recover, exit the record function with all the shift keys up.
9006 You have exited the record function in a different shift state from
when the first key of the keystroke sequence was recorded. The
sequence may not play back in the same shift state you entered it in.
To correct the keystroke sequence, press the Recrd key and enter the
keystroke sequence in the desired shift state.
•X
9007 While performing the record function, you pressed the Play key or the
SetUp key. These keys are not valid sequence keys.
To recover, press the Reset key or a valid sequence key.
9008 While performing the play function, the shift state of your keyboard
changed when the keystroke sequence was played back.
To recover, press the appropriate shift keys. If you want to correct the
keystroke sequence, press the Recrd key and enter the keystroke
sequence again.
9009 While performing the play function, you tried to play back a keystroke
sequence in a different shift state from the one it was entered in.
I To correct the keystroke sequence, press the Recrd key and enter the
keystroke sequence in the desired shift state.
9010 While performing the play function, you pressed a PF key that does
not have a keystroke sequence assigned to it.
I To recover, press a PF key that has a keystroke sequence assigned to
I it, or press the Play key again to stop the play function.
9011 You tried to press the SetUp key with a shift key pressed.
To recover, press the SetUp key with the shift key(s) up.
56