IBM 3180 1 User Manual page 58

50
X Your display station is not authorized to do the requested
printer-related function.
Press the Reset key. Appropriate follow-on action depends upon
the key you used and upon what appears in the printer assignment
positions in the operator information area.
1. After the Print key:
a. If i=>-a?? is displayed, you should press the Reset key
and use the Ident key to display your new assignment
before you request a print.
b. If nothing is displayed in the printer assignment positions
and a @ is not displayed in the operator information
area, you are not authorized to print at all. Press the Reset
key and take a different action.
c. If nothing is displayed and a Si is displayed in the "
operator information area, you have no automatic
authorization. Press the Reset key. If a printer is available,
you can establish assignment by using the Ident key plus
two valid numerals.
d. If is displayed, there is an error in the
authorization. Press the Reset key. Request assistance,
select a different printer, or take a different action.
2. After the Ident key plus two numerals:
You are not authorized for the printer you specified. Press the
Reset key and start the Ident procedure again or take other
action.
3. Immediately after the Ident key:
You are not authorized to print at all. Press the Reset key and
take other action.
X The security key on your display station is off.
Turn the key clockwise to unlock the keyboard. If the key symbol
does not go away, replace the display element. (Go to Chapter 5.)
If the problem still exists,- replace the logic element. (Go to Chapter
5.)