IBM 3180 1 User Manual page 22

SECTION 3. ENTERING THE DISPLAY STATION MODEL ID AND THE
KEYBOARD ID
Before you begin this section, get the display station model ID and the keyboard
ID from the system floor plan or ask the person who planned the setup. The
display station model ID is the screen size supported for your display station.
The keyboard ID is the keyboard option(s) that is supported byyour control unit.
If you need more information aboutthe model ID and keyboard ID, see "Special
Display Station Adjustments" in Chapter 2,
3.1
3.2
14
Set the Power switch to Off and wait five seconds.
Press and hold any key on the keyboard and set the Power
switch to On.
Hold the key until the following display appears:
UiAMAAAAAAAAAAAAAAAl
H HHKKKHHKKKKHKKKHKKKKKHKHKHKKKHKHHKKHH H
H H
H KKKKKHKKKHKHK»KKKHKHHaHKKKKXKHKHHKKKH H
Ea £ B £1
-Display Station-
Model ID
BEEeBBEEBBEEEEBS
Note: There may be additional information on the bottom
of your display. You will not need that information to set
the display station model ID.
C9468016