IBM 3180 1 User Manual page 51

MB iBiiaiBiaiaisiBiiiiBiaiaiiiBBi mmm iaiaiii
If you want to remove the keystroke sequence saved on a
particular PF key;
1. Press the Recrd key.
2. Press the PF key you used to record the keystroke
sequence.
3. Press and hold down an Alt (alternate) key.
4. Press the Dv Cnl (device cancel) key.
I If you want to remove all the keystroke sequences saved
on all the PF keys:
1. Press the Recrd key.
I 2. Press and hold down an Alt (alternate) key.
3. Press the Er Inp (erase input) key.
To play back a keystroke sequence:
1. Move the cursor to where you want the sequence to
start.
2. Press the Play key. A blinking P appears in the
operator information area.
3. Press the same PF key you used to record the
keystroke sequence. The P stops blinking. When the
play back completes, the P disappears.
If an error code appears in the operator information area
during the record or play operation, see Chapter 3,
Operator Messages and Error Codes, for the error code
and its meaning.