6.
Exchange the failing cable attachment module
with a good one. For instructions on how to
package a failing element, go to Packaging
Instructions in this chapter.
7.
Slide the cable attachment module into the
display element until it stops; then turn the knob
clockwise until tight.
112
8.
Connect the cable to the cable attachment module.
ffl
9.
Plug the power cord into the wall outlet.
10. Set the Power switch to On and verify that the display
station is operating correctly.
If the problem still exists, you may have to replace a
second element. For instructions, return to the last
step of the CPAR that directed you to Chapter 5.
If you have replaced all the elements listed at the end
of the CPAR and still have a problem, contact your
IBM sales representative.