Precautions For Emergency Recovery - Komatsu WB93S-5 F50003 Operation & Maintenance Manual

2.7 PRECAUTIONS FOR EMERGENCY RECOVERY

The draw hooks must be used only for the first aid and not for
q
towing the machine.
Before moving the machine, make sure that the gearshift lever
q
is in neutral and disengage the four-wheel drive.
Incorrect manoeuvres may cause serious damage, injury and
q
even death.
To move the machine, use properly dimensioned steel cables;
q
do not use worn cables or cables with broken strands (A),
twisted cables (B), deformed cables (C).
During the removal, no one should be allowed to get near the
q
machines or the cable.
Do not get astride the cable.
q
Move the machine only as far as necessary to allow the
q
required repairs to be carried out.
Do not remove the machine in any way other than that indicated
q
in paragraph "3.15.1 HOW TO REMOVE THE MACHINE".
The maximum applicable force for each draw hook is F =
q
4854 kg.
Use cables of the same length and pull continuously,
q
without jerking movements.
The drawing force must be parallel to the machine axis
q
(advancement direction), in such a way as to avoid the
application of sideward forces on the draw hooks.
CAUTION
PRECAUTIONS FOR EMERGENCY RECOVERY
F
F
RKAB6020
RKAB2840
RWA05380
51