PRECAUTIONS TO BE TAKEN DURING MAINTENANCE
2.8 PRECAUTIONS TO BE TAKEN DURING MAINTENANCE
2.8.1 WARNING PLATES
Before starting any maintenance operation, position the
q
machine on firm and level ground, engage the safety locks of
the equipment and of the controls, stop the engine and apply
the parking brake.
If anyone starts the engine and operates the control levers while
q
the operator is servicing the machine, this may result in serious
injury or even death.
To avoid these risks, always attach warning plates to the
q
steering wheel, to the control levers and to the ignition key
before performing any maintenance operation; if necessary,
attach additional warning tags also around the machine and in
particular on the cab door handles.
2.8.2 TOOLS
Use only the tools supplied together with the machine and high-
q
quality tools suitable for the tasks to be performed.
Do not use worn, damaged, low-quality tools or tools that are
q
not suitable for the tasks to be performed, in order to avoid any
personal injury.
After use clean the tools carefully and store them in the
q
compartment situated in the right access platform.
52
RKAB4910
DO NOT
START
ENGINE
RWA01210
RWA01310
RKAB6030