Checking The Front Axle Oil Levels; Checking The Rear Axle Oil Level - Komatsu WB93S-5 F50003 Operation & Maintenance Manual

4.8.8.d CHECKING THE FRONT AXLE OIL
LEVELS
Carry out this check with the machine parked on a level
q
surface and the work equipment resting on the ground.
DIFFERENTIAL
This check is visual and serves to verify if the lubricant reaches
the hole (1); if necessary, top up using the prescribed oil (see "4.3
FUEL, COOLANT AND LUBRICANTS").
The level hole (1) must be used also as filling hole. Use a 1/2"
square wrench.
FINAL REDUCTION GEARS
This check must be carried out on each reduction gear positioned
with its plug on the horizontal axis.
If necessary, move the machine slightly until reaching the
specified position, which is indispensable for an accurate check.
This a visual check and serves to verify if the lubricant reaches
the hole (2); if necessary, top up using the prescribed oil (see "4.3
FUEL, COOLANT AND LUBRICANTS"). Use a 17 mm wrench.
4.8.8.e

CHECKING THE REAR AXLE OIL LEVEL

Carry out this check with the machine parked on a level
q
surface and the work equipment resting on the ground.
DIFFERENTIAL
This check is visual and serves to verify if the lubricant reaches
the hole (1); if necessary, top up using the prescribed oil (see "4.3
FUEL, COOLANT AND LUBRICANTS").
The level hole (1) must be used also as filling hole. (Use a 17 mm
wrench).
FINAL REDUCTION GEARS
This check must be carried out on each reduction gear positioned
with its plug on the horizontal axis.
If necessary, move the machine slightly until reaching the
specified position, which is indispensable for an accurate check.
This a visual check and serves to verify if the lubricant reaches
the hole (2); if necessary, top up using the prescribed oil (see "4.3
FUEL, COOLANT AND LUBRICANTS"). Use a 17 mm wrench.
AVVERTENZA
AVVERTENZA
MAINTENANCE PROCEDURES
1
2
1
RWAA9100
RWAA9110
RWAA9120
2
RWAA9130
213