USE OF THE MACHINE
3.6.5.3
MAXIMUM IMMERSION DEPTH
If it is necessary to work with the machine immersed in water or on river banks or sea shores, always
q
check the water depth and the current flow.
Make sure that the surface on which you are working is sufficiently firm.
q
If it is necessary to work with the machine immersed in water, make sure that the maximum depth does not exceed
50 cm and in any case that the engine cooling fan does not touch the water, since it may get damaged or even
break.
50 cm
When working in water or on muddy ground, lubricate the articulations more frequently than usual.
q
After work, remove any dirt or mud and lubricate the articulations.
q
140
WARNING
CAUTION
RKA16740