Product Identification; Machine Identification Number (Pin); (Alternatively For Some Markets) - Komatsu WB93S-5 F50003 Operation & Maintenance Manual

PRODUCT IDENTIFICATION

1.4 PRODUCT IDENTIFICATION
The Komatsu backhoe loader and its main components are identified by serial numbers stamped on the identification
plates. The serial number and the identification numbers of the components are the only numbers that must be indicat-
ed to the Dealer when requiring assistance and ordering spare parts.
1.4.1 MACHINE IDENTIFICATION
NUMBER (PIN)
The machine identification number "PIN" is stamped on the
right side of the frame front.
1.4.2 MACHINE IDENTIFICATION PLATE
AND PRODUCT IDENTIFICATION
NUMBER (PIN)

(alternatively for some markets)

The Komatsu BACKHOE LOADERS described in this manual
are CE marked, in fact they are in full compliance with the EU
harmonised standards. The Product Identification Number (PIN)
is stamped on the lower part of the plate. The customer must be
able to indicate the PIN at any time, that is why it must compulso-
rily be written in the following table. The plate with the CE marking
is applied inside the cab, on the left vertical wall of the frame, at
the height of the brake pedals.
6
MODELLO - MODEL
TYP - MODELE
MATRICOLA N˚ - SERIAL N˚
FABR. NR. - SERIE NR.
ANNO - YEAR
BAUJAHR - ANNEE
MASSA TOTALE - TOTAL WEIGHT
GESAMTGEWICHT - POIDS TOTAL
POTENZA MOTORE - ENGINE POWER
LEISTUNG - PUISSANCE MOTEUR
Product Identification Number
PIN
MANUFACTURED BY KOMATSU UTILITY EUROPE S.p.A.
36025 NOVENTA VICENTINA (VI) - ITALY
MODEL
SERIAL N˚
YEAR
TOTAL WEIGHT
ENGINE POWER
Product Identification Number
PIN
MANUFACTURED BY KOMATSU UTILITY EUROPE S.p.A.
36025 NOVENTA VICENTINA (VI) - ITALY
RKAB5970
RKAB2680
kg
kw
37A-98-11820
37A-98-11820
RKA14970
kg
kw