SAFETY, NOISE AND VIBRATION PLATES
2.1 SAFETY, NOISE AND VIBRATION PLATES
2.1.1 POSITION OF THE SAFETY PLATES
The safety plates must always be legible and in good conditions; for this reason, if they are dirty with dust, oil or
q
grease, it is necessary to clean them with a solution made of water and detergent.
Do not use fuel, petrol or solvents.
If the plates are damaged, ask for new ones to Komatsu or to your Komatsu Dealer.
q
In case of replacement of a component provided with a safety plate, make sure that this plate is applied also on
q
the new piece.
The machine can be provided with other plates in addition to those indicated below; in any case, keep also to the
q
instructions given in the additional plates.
DURANTE I TRASFERIMENTI
SU STRADA I PEDALI FRENO
DEVONO ESSERE COLLEGATI
CON APPOSITO SPINOTTO
PRIMA DI PARTIRE PER IL
TRASFERIMENTO SU
STRADA BLOCCARE LA LEVA
COMANDO PALA!
20
42N-93-11360
42N-93-1
1360
I
GB
D
F
E
P
42N-93-11130
I
NON INSERIRE LA DOPPIA TRAZIONE
GB
IN TRASFERIMENTO STRADALE
DO NOT ENGAGE 4 WHEEL DRIVE
DURING ROAD TRAVELLING
D
DIE 4 RADANTRIEB EINSCHALTEN
W˜HREND DER STRASSENFAHRT NICHT
F
NE PAS ENGAGER LES 4x4 POUR LE
DEPLACEMENT ROUTIER
E
DESCONECTAR 4x4 ANTES DE CIRCULAR
EN CARRETERA
P
NˆO ENGRENE A TRASMISSˆO AS 4
RODAS CONDUZINDO EM ESTRADA
42N-93-11120
DURANTE I TRASFERIMENTI
DEVONO ESSERE COLLEGATI
SU STRADA I PEDALI FRENO
CON APPOSITO SPINOTTO
42N-93-11110
PRIMA DI PARTIRE PER IL
TRASFERIMENTO SU
STRADA BLOCCARE LA LEVA
COMANDO PALA!
+
L
+
SPEED CONTROL
BUCKET CLOSE
L
KICK-DOWN
DIFFERENTIAL
BUCKET OPEN
LOCK
DECLUTCH
RKA16720