Table of Contents
Advertisement
GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE
PRECAUTIONS WHEN STANDING UP FROM OPERATOR'S SEAT
When standing up from the operator's seat to adjust the operator's
seat, always lower the work equipment completely to the ground,
set work equipment lock lever (1) and parking brake lever (2) to the
LOCK position (L), and stop the engine.
If the control lever is touched by accident, there is danger that the
machine may suddenly move and cause serious personal injury.
PRECAUTIONS WHEN LEAVING MACHINE
If the proper procedures are not taken when parking the machine,
the machine may suddenly move off by itself, and this may lead to
serious personal injury or death. Always do the following.
When leaving the machine, always lower the work equipment
completely to the ground, set work equipment lock lever (1) and
parking brake lever (2) to the LOCK position (L), and stop the
engine.
Always lock all parts, take the key with you and leave it in the
specified place.
EMERGENCY EXIT FROM OPERATOR'S CAB
Machines equipped with a cab have doors on the left and right sides. If the door on the one side does not open,
escape from the door on the other side.
DO NOT GET CAUGHT IN WORK EQUIPMENT
The clearance in the area around the work equipment changes according to the movement of the link. If you get
caught, you may suffer serious personal injury or death. Do not allow anyone to come close to any rotating or
extending/retracting portion.
2 - 16
SAFETY
Advertisement
Chapters
Table of Contents
