Unauthorized Modifications; Leaving The Operator's Seat - Komatsu WB93S-5 F50003 Operation & Maintenance Manual

2.2.4 UNAUTHORIZED MODIFICATIONS

Any modification made to the machine without the authorization of Komatsu can involve hazards.
q
Before making a modification, consult your Komatsu Dealer. Komatsu declines any responsibility for injury or
q
damage caused by unauthorized modifications.

2.2.5 LEAVING THE OPERATOR'S SEAT

When leaving the operator's seat, even if for a short time, make
q
sure that the machine is in a safe position. (See "2.4.12
PARKING THE MACHINE").
Before leaving the operator's seat, carry out the following
q
operations in the sequence indicated below:
1 - Lower the equipment to the ground.
2 - Press the servo control locking button (LED on).
NOTE
On machines equipped with backhoe servo controls, all
q
movements are inhibited when the button is in locking position
(LED on).
3 - Engage the safety lock of the mechanical controls.
4 - Apply the parking brake.
5 - Shift the reverse gear lever to the neutral position.
6 - Stop the engine.
If you have to go so far away that you will not be able to see the
machine, extract the ignition key.
RWA02000
GENERAL PRECAUTIONS
N
RKAB6000
RKAB2780
RKAB2800
RKAB4820
31