Parking The Machine - Komatsu WB93S-5 F50003 Operation & Maintenance Manual

3.7 PARKING THE MACHINE

3.7.1 PARKING ON LEVEL GROUND
Park the machine on firm and flat ground, in a sufficiently
q
wide space, so that checks, daily lubrication and refuelling
can be carried out without problems.
Lower the front bucket to the ground and set the backhoe to the
q
transport position or with the bucket resting on the ground.
Keep to all the safety rules, in order to avoid any movement
q
of the machine when the operator is absent.
When leaving the machine, remove the ignition key, use the
q
ladders and handles, lock the cab.
1 - Park the machine on firm and level ground, in a sufficiently
wide space.
2 - Shift the reverse gear lever to position (N) and apply the
parking brake.
3 - Rest the front bucket and the backhoe bucket onto the ground; if
this is not possible because the space is insufficient, the backhoe
must be folded in the transport position and secured with the
appropriate lock.
4 - Press the servo control locking button (LED on).
5 - Engage the safety lock of the mechanical controls.
NOTE
On machines equipped with backhoe servo controls, all
q
movements are inhibited when the servo control locking button
is in locking position (LED on).
6 - Stop the engine, proceeding as described in "3.8 STOPPING
THE ENGINE".
7 - Leave the driving position using the ladders and handles
provided for this purpose.
8 - Refuel, taking the necessary precautions.
9 - Remove the ignition key and lock the cab.
WARNING
PARKING THE MACHINE
RKAB2800
RKAB6000
RKAB2780
RKA16810
141