Precautions To Be Taken During Work; When Starting The Engine; Rules For Travelling On Roads - Komatsu WB93S-5 F50003 Operation & Maintenance Manual

PRECAUTIONS TO BE TAKEN DURING WORK

2.4 PRECAUTIONS TO BE TAKEN DURING WORK

2.4.1 WHEN STARTING THE ENGINE

Before getting on the machine, walk around it and check for people and objects that might be in the way.
q
Do not start the engine if warning plates have been attached to the steering wheel or the control levers.
q
When starting the engine, sound the horn as an alert signal.
q
Start the engine and operate the machine only while seated with fastened safety belt.
q
Do not allow anyone to get on the machine or enter the cab.
q

2.4.2 RULES FOR TRAVELLING ON ROADS

The machine is equipped with multifunction safety locks that must be used both for maintenance operations and
q
road travel.
When it is necessary to travel on roads, proceed as follows:
q
1 - Position the safety lock of the front loader so that the bucket is lifted from the ground, thus ensuring better
visibility and the stability of the machine.
2 - Install the front bucket swing lock and secure it with the safety pins.
3 - Install the teeth protection casing on the front bucket.
4 - Lift the backhoe boom until engaging the safety coupling. The arm and bucket must in any case be completely
folded.
5 - The backhoe must be rotated and resting against the machine structure. This is the only position homologated
for road travel in Italy.
6 - For travelling with folded backhoe, the unit must be moved on its guide in such a way as to be positioned
towards the road centre, against the lock and with the bucket facing the road side.
7 - Fasten the backhoe with the swing lock pin.
8 - Connect the safety chains to prevent the accidental lowering of the stabilizers.
9 - Engage the safety locks of the loader and backhoe control levers. For further information on their position, see
"3.1 SAFETY LOCKS".
When it is necessary to travel on roads, the four-wheel drive must be disengaged and the brake pedals must be
q
connected with the appropriate pin.
When travelling on roads, keep to the rule of the road and operate the flashing light positioned on top of the cab.
q
When travelling on roads, keep the work lights off.
q
IMPORTANT
In any case, keep to the traffic rules in force.
q
38