PRECAUTIONS TO BE TAKEN DURING WORK
2.4.12 PARKING THE MACHINE
Park the machine on firm and level ground. If this is not possible
q
and it is necessary to park on a slope, position the machine with
the front bucket directed downwards and carry out the following
operations:
1 - While keeping the machine stopped with the brakes, apply
the parking brake.
2 - Dump the front bucket to the unloading position and lower
the arms until the teeth are driven into the ground.
3 - Carry out the same operations with the backhoe bucket.
4 - Stop the engine.
5 - Position wedges or safety blocks under the front and rear
wheels.
Always rest the work equipment on the ground; if it is necessary
q
to park with lifted arms, make sure that the safety locks are
engaged.
Always engage the control lever safety locks.
q
NOTE
The servo control locking button inhibits also the movements of
q
the backhoe when this is equipped with servo controls.
When leaving the machine, apply the parking brake, make sure
q
that the cab windows are closed, remove the ignition key and
finally lock the doors.
If it is necessary to park on public roads, provide for signalling
q
the presence of the machine according to the local regulations
in force (signalling fires, fences, road works ahead, alternated
direction and direction signs, etc.).
48
RKAB2800
RKA16800
RKA13760
RKAB6000
RKAB2780