Adjusting The Controls - Komatsu WB93S-5 F50003 Operation & Maintenance Manual

INSTRUMENTS AND CONTROLS
3.3.6.3

ADJUSTING THE CONTROLS

1 - Steering wheel adjusting lever
2 - Joystick locking levers
(only for the version with servo-assisted backhoe)
3 - Arm support adjusting knob
(only for the version with servo-assisted backhoe)
4 - Joystick stroke adjusting knob
(only for the version with servo-assisted backhoe)
1 - STEERING WHEEL ADJUSTING LEVER
The steering wheel can be adjusted only with engine off
q
and the operator seated in the driving position.
Before using the machine, make sure that both the steering
q
wheel and the adjusting lever are locked.
Non-compliance with these instructions may lead to
serious accidents.
The lever (1) is positioned under the steering wheel and allows
the latter to be adjusted according to the physical structure of the
operator.
Different inclinations are possible and angular movements can be
obtained after lifting the lever (1); once the desired position has
been reached, release the lever.
114
WARNING
1
2
4
3
4
1
RKAB3230
3
RKA15370
2
RKA15380
RKAB3230