Table of Contents
Advertisement
GENERAL PRECAUTIONS
2.2.6 GETTING ON AND OFF THE MACHINE
Do not jump on or off the machine, both when it is at rest and
q
when it is moving.
Always use the handles and the safety ladders to get on or off
q
the machine, and be very careful.
Do not hold or rest on the steering wheel or the gearshift lever.
q
Both when getting on and when getting off the machine, always
q
maintain three points of contact (holding or resting points), in
order to avoid losing your balance and falling down.
Tighten the handle and ladder connection screws if they are
q
loose and clean the handles and steps if they are dirty with oil or
grease. Carefully clean the cab floor if it is dirty with oil, grease,
mud or rubble.
2.2.7 CHECKING THE REAR-VIEW
MIRRORS
Make sure that the rear-view mirrors are clean and correctly
q
positioned; they must allow the operator to see the rear of the
machine with no need to move the chest with respect to the
normal work position.
If the rear-view mirrors should move or break during work, stop
q
the machine immediately and fasten or change them.
Working without checking the area behind the machine is
q
dangerous, since the machine may hit persons who are
incautiously standing in the work area, fixed obstacles or
manoeuvring vehicles.
32
RWA25860
RKAB6540
RWA18670
Advertisement
Chapters
Table of Contents
