Table of Contents
Advertisement
SAFETY
UNAUTHORIZED MODIFICATIONS
Any modification made without authorization from Komatsu can create a hazards. Before making any modifications, consult
your local distributor. Komatsu will not be responsible for any injury or damage caused by any unauthorized modifications.
LEAVING OPERATOR'S COMPARTMENT
Below are listed procedures that must be followed when exiting the
operator's cab.
1.
Park the machine in a level area, lower all work equipment to the
ground.
2.
Engage the parking brake (2) in the (LOCKED) position.
3.
Place safety lock lever (1) for loader control in the (LOCKED)
position.
4.
Turn the engine OFF, remove ignition key and keep the key with
you.
5.
Use the key to lock and secure all the equipment locks. This will
prevent other unauthorized personnel from tampering with your
machine. Keep in mind you are responsible for securing your
machine.
Remark
Never leave your machine running and unattended, even for a moment.
Work equipment posture: See "PARKING THE MACHINE" on page (2-78)
Lock: See "WORK EQUIPMENT LOCK LEVER" on page (2-34)
1-4
WA320PT-5L
Advertisement
Table of Contents
